Olide-120B/DSW120 Automatic Swing Door Opener Remote Control

New remote control with larger size, it's convenient to press the button. And the new version of the remote control has an antenna, which can be pulled out when the signal is not good, making the remote control work more stably.

Note: the old remote control model has been discontinued.

The remote control are pre-encoded to work with the door opener.
Nevertheless,here is the process for encoding the remote with the opener.
1. To pair: Hold the “Encode” button until the buzzer sounds.
• Then press any button on the remote control.
• The buzzer should silence meaning that encoding process is complete.
2. If successful: when the remote control is used the buzzer will sound once, for 2 seconds.
If the buzzer beeps twice,this means that the encoding has failed. Repeat step 1.

3. To delete all codes: Hold the “Encode” button on the component assembly until the buzzer is silent.
4. To open the door momentarily:Press the "Automatic" button once.
Note:A maximum of 30 keychain remotes can be used on any one operator.