Safety Beam Sensor For Automatic Door Opener

  • $53.06
Shipping calculated at checkout.

Only 472 left!

Safety Beam Sensor For Automatic Door Opener

safety beam for automatic door

Beams sensor is widely used as the auxiliary function of (human bodies or objects) presence detect for autodoors and can accurately and reliably detect. Beams sensor will provide the opening door signal if it detects the presence of human bodies or objects, so as to avoid the potential safety hazard event of human bodies or objects clamping by autodoors.

Safety Beam Sensor Features

  • Adopt plug-in socket. Easy and convenient wiring method. Connect wire by matching color.
  • It is controlled by micro-computer which is highly intergrated and stable.
  • Optional between single beam and dual beam, flexible selection of distance.
  • It consists of pairs of transmitting and receiving beam sensors and main controller, with long transmitting distance and flexible and convenient beam senor wiring.
  • It adopts unique high precision calculation model, with sunlight filter factor, so the anti-interference ability of the system is greatly improved.
  • It is provided with receiver sensor short circuit fault alarm function.

Product Technical Parameters

Voltage: AC/DC 12-36V Quiescent current: 18mA(when the voltage is 12V)
Working current: 58mA(when the voltage is 12V) Max emitting/receiving distance: 10m
Choosing method of NO/NC: knob  Emitting line: blue wire - 5.5m
Receiving line: black wire - 5.5m Beam amount: single or double
Working temperature: -42°- 45°C Working humidity: 10-90%RH
Dimension(beam sensor): 105.5*53.4*28.5mm(L*W*H) Dimension(end): 19*13mm(L*D)


Specific Considerations

  1. Choose the white socket when there is only one ray of beam. Choose the white and black socket when there are two rays of beam.
  2. The bore diameter of the drilled hole for end: 13mm 
  3. Suggested installation height for single ray: 60cm              double ray: 1st: 30cm      2nd set: 90cm
  4. Emitting and receiving ends have some induction area. Guarantee horizontal and vertical alignment.
  5. No potted landscape or stacked things between ends.
  6. The system effectively resists natural sunlight interference. Avoid direct sunlight to ends.
  7. Guarantee the beam is 20cm above the ground.

safety beam sensor installation method

Safety Beam Sensor Wiring Diagram

wiring diagram of safety beam sensor

We Also Recommend


Have a Question?

Be the first to ask a question about this.

Ask a Question
Click to edit the product in Ali Orders.
Note: only show for shop owner