M256 Carpet Pad Sensor, Pressure Sensor For Automatic Door Entrance

Carpet Pad Sensor Switch For Autodoor Entrance/Exit, Pressure Sensor Switch Factory

  • $187.50
Shipping calculated at checkout.

Only 552 left!

Pressure Sensor Switch For Automatic Door Entrance

Pressure sensor switch is widely used in the sensing control for autodoors at the entrance and exit, convenient for operation using a foot instead of a hand, free of hand contact pollution.

  • The mat is made of  PVC material, Surface sticker are Wear-resistant and compressive.
  • Up and down mat are joint by high wave welded, Waterproof.
  • In the center of the square mat, there is a round stainless steel box to protect the wireless send board from pressure.
  • 2.4GHZ(2.405GHZ----2.485GHZ)  1SM channel. Anti-interference.
  • Low power emission but long distance technology, so the battery life will be very long.

Pressure Sensor Switch For Automatic Door Entrance Technical Specifications

Power supply: 2pcs button batteries Emission distance: Above 5m (without Shielding environment)
Consumption: 6uA(Standby current) Emission current: 3.8mA
Always on:  3.8mA Life time: 300 times treating every day, at least last 27 mouth   
Maximum pressure: 800kg Trigger strength: 15kg
Waterproof: IP68(it is not a good idea to put it in water for long time)

Note: There is no battery along with the mat, you need buy it from your local store, because the battery is forbidden to ship by express. To install the battery, press the stainless steel lid and move it off.

M256S Receiver Technical Parameters

Power supply: AC/DC 12V-36V  Standby current: 15mA 
Action current: 80mA(DC12V)  Working Temp: -42 - 45°C
Work humidity:  10-90%RH  Dimension:   123*50*32mm

Remark: Avoid to install it between the motor and controller, the signal will be disturbed.


We Also Recommend


Have a Question?

Be the first to ask a question about this.

Ask a Question
Click to edit the product in Ali Orders.
Note: only show for shop owner