Olide-120B/DSW120 Automatic Swing Door Opener Remote Control
Olide-120B/DSW120 Automatic Swing Door Opener Remote Control
extra remote control for model Olide-120B/DSW120 autoamtic swing door opener
The remote control are pre-encoded to work with the door opener.
Nevertheless,here is the process for encoding the remote with the opener.
1. To delete all codes: Hold the “Encode” button on the component assembly until the buzzer is silent.
2. To pair: Hold the “Encode” button until the buzzer sounds.
• Then press any button on the remote control.
• The buzzer should silence meaning that encoding process is complete.
3. If successful: when the remote control is used the buzzer will sound once,for 2 seconds.
If the buzzer beeps twice,this means that the encoding has failed. Repeat step 2.
4. To open the door momentarily:Press the "Automatic" button once.
Note:A maximum of 30 keychain remotes can be used on any one operator.
We Also Recommend
QUESTIONS & ANSWERS
Ask a Question-
What kind of batteries go in here?
Hi, the battery for remote control is 27A 12V; you can see in the picture: