Hand Programmer For Olide-120B, DSW120 Automatic Swing Door Opener
Hand Programmer For DSW120 Automatic Swing Door Opener
The hand programmer is using for adjust door opener parameters, such as hold open time, closing force, lock mode, etc...
Note: Only the new version of the hand programmer is available now, while the old version of programmers and controllers have been discontinued.
If the production batch of the controller is before 2023 (please send us a picture for confirmation, the production date is located on the lower side of the controller, as shown in the image), it is incompatible with the current new hand programmer. Using the old controller with the new programmer may cause errors, in which case the controller will need to be replaced with a new one. We recommend replacing both the old controller and the programmer together.
We Also Recommend
QUESTIONS & ANSWERS
Ask a Question-
Do you have a handheld programmer for the dsw 100n model
Hi,
Can you please send me a photo of the controller? We want to confirm the model. Or please tell me when did you buy the door opener, we'll confirm if 120B hand programmer can be used. Because we are constantly updating the controller, the debugging handle is not compatible with all controllers, we need to confirm which debugging handle you need through the controller and the time of purchase. -
will this hand programmer also work with the dsw-100 model?
Hi Chad C Smith,
Sorry, the hand programmer can not suitable with model DSW100, beacause we have upgrade the controller, it's not applicable.
Best Regards,
Olidesmart -
Hi, I need a Hand Programmer For an Olide-510FW as show below: https://www.amazon.com/gp/product/B09CGNN6MZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Thanks.
Hi, there is no hand programmer for Olide-510FW, it's a receiver; This hand programmer is for model Olide-120B swing door opener;
-
i I need a door programmer for the dsw100n ASAP
Hi, we don't have DSW100N and no programmer for it. Please confirm your model number.
-
i have a Olide 510 installed and have a question. when the wind blows the door comes open a little and triggers the alarm. is there an adjustment that i can program to keep the door from opening when the wind blows? thanks
Hi,
You can try to increase the hold closing force, the higher the value, the less likely the door will be blown open by the wind.